Three-Ring Reducer
features:
1. High carrying capacity, superior performance and long service life
2. The gear ratio is large and dense, the first-stage reduction ratio is 11~99, and the second-stage reduction ratio is the largest 9801
3. Smooth operation, low noise, low vibration, noise less than 78 dB, vibration amplitude less than 0.025mm
4. High efficiency, single stage 92%~96%
5. Compact structure and light weight
6. Multi-axis configuration. The two input parts of the three-ring transmission mechanism can be integrated with a pair of helical gears or a pair of spiral bevel gears
Description
1.Models
(1) SH type-basic type (single-stage three-ring transmission) three-ring reducer;
(2) SHD type-single-stage three-ring reducer directly connected with the motor;
(3) SHDK type-single-stage three-ring reducer directly connected with hollow shaft and motor;
(4) SHC Ⅰ type—combined two-stage transmission, three-ring transmission and cylindrical gear transmission three-ring reducer;
(5) SHCⅡ type—combined two-stage transmission, three-ring transmission and a cylindrical gear transmission three-ring reducer at the bottom;
(6) SHCD type—combined two-stage transmission and a three-ring reducer directly connected to the motor;
(7) MSH type-three-ring reducer for slow drive of cement mill;
(8) SHS type—two-stage three-ring transmission three-ring reducer;
(9) LLSH type—three-ring reducer for transmission of continuous cast steel straightening machine;
(10) SHL type—vertical single-stage three-ring transmission three-ring reducer;
(11) SHLD type-vertical three-ring reducer directly connected to the motor;
(12) SHLDK type—vertical, hollow shaft three-ring reducer;
(13) SHZ type—combined two-stage transmission with bevel gear transmission. High-speed shaft and low-speed shaft plane perpendicular to the three-ring reducer;
(14) SHP type—single-stage three-ring transmission, three-ring reducer with split end of the box
(15) ZZSH type—three-ring reducer for pile drilling rig;
(16) SHCPD type—combined two-stage transmission, plus a cylindrical gear transmission and a three-ring reducer directly connected to the motor;
(17) SHZP type-add bevel gear transmission, the box end face splits three-ring reducer;
(18) YPSH type—three-ring reducer for disc feeder;
(19) GTSH type—three-ring reducer for ladle turret.
Among them, SH—single-stage three-ring reducer, D—shaft extension and motor directly connected, K—cylindrical shaft hole, flat key set connection, C—plus cylindrical gear drive, M—for cement mill slow drive, S— Two-stage three-ring transmission, L—Vertical, LL—Continuous cast steel tension leveler transmission, P—Box end face split, Z—Combined two-stage transmission, ZZ—Pile hole drilling machine, YP—disc feed For machine, GT—for ladle rotary table.
2.Parameters:
| Type | Structure Characteristics | Specification, transmission ratio and output torque |
| SH（TR） | Basic type, single-stage three ring drive, two high-speed parallel and symmetrical to low-speed shaft, box horizontal seat mounting, flat split | a=80～1070mm |
| i=11～99 | ||
| T2=0.124～469kN.m | ||
| SHO（TRO） | One or two high-speed shafts are directly connected with the motor; the rest is the same as SH (TR) | a=105～300mm |
| i=11～99 | ||
| T2=0.259～10.52kN.m | ||
| SHDK（TRDK） | The low-speed shaft system is hollow shaft with sleeve hole; the box has anti swing pin hole; the rest is the same as SHD (TRD) | a=125～300mm |
| i=11～99 | ||
| T2=0.435～10.52kN.m | ||
| SHCⅠ（TRCⅠ） | Combined two-stage transmission; three ring drive with high-speed cylindrical gear on one or both sides; the same as SH (TR) | a=125～1350mm |
| i=21.7～605 | ||
| T2=0.435～932.42kN.m | ||
| SHCⅡ（TRCⅡ） | Combined two-stage transmission; the high-speed cylindrical gear transmission is placed at the lower part of the box split surface; the rest is the same as SHC Ⅰ (TRC Ⅰ) | a=125～1350mm |
| i=21.7～605 | ||
| T2=0.435～932.42kN.m | ||
| SHCD（TRCD） | Combined two-stage drive; one or two high-speed shafts are directly connected with the motor; the rest is the same as SHC I (TRC I) | a=125～450mm |
| i=21.7～605 | ||
| T2=0.435～35.9kN.m | ||
| MSH（MTR） | For cement mill slow speed drive; high speed shaft is directly connected with motor; the rest is the same as SHCD (TRCD) | a=350～600mm |
| i=100～605 | ||
| T2=15.79～87.66kN.m | ||
| SHS（TRS） | Two stage three ring drive; high speed stage is added to one side or both sides of low speed stage; the rest is the same as SH (TR) | a=215～1350mm |
| i=299～9801 | ||
| T2=3.336～938kN.m | ||
| LLSH（LLTR） | Continuous casting steel straightener transmission; It is equivalent to two SHC Ⅱ (TRC Ⅱ) type double structure |
a=300～500mm |
| i=100～605 | ||
| T2=10.52～48.01kN.m | ||
| SHT（TRT） | Single stage three ring drive; two high speed parallel and located on the same side of low speed shaft; the rest is the same as SH (TR) | a=125～400mm |
| i=11～99 | ||
| T2=1.024～20.12kN.m | ||
| QSH（QTR） | For crane; can be installed horizontally or vertically; same as SHT (TRT) | a=250～630mm |
| i=12.5～100 | ||
| T2=1.024～20.12kN.m | ||
| QXSH（QXTR） | For crane; three point suspension support; the same as SHT (TRT) | a=250～630mm |
| i=12.5～100 | ||
| T2=1.024～20.12kN.m |
If you have any product needs or have questions about the product, you can contact us and we will reply you in time.